MIDAMAX 190 (Ceilings)

An environmentally friendly, easy to apply, good quality Matt Acrylic emulsion for use as an interior/exterior finishing coat, ceiling paint or interior primer. It has been formulated with an optimum blend of acrylic resins, precisely graded fillers and fade resistant pigments. It offers excellent hiding power and has good grain filling properties. The product conforms to GBCSA environmental requirements and EU 2010 targets.

RECOMMENDED USAGE: INTERIOR and EXTERIOR surfaces. Used as interior primer for new or previously painted sand/cement plaster, concrete, fairfaced brickwork, gypsum boards (suitably primed when new) and building boards. Also used as an economical finishing coat for interiors and ceilings, as well as asbestos and fibre cement. 

NOT RECOMMENDED FOR: Not suitable for areas of high traffic or humidity.

COLOUR RANGE: White & Pastel Colours.

APPLICATION: Correct preparation is essential. All surfaces must be sound and prepared in the Then thoroughly stir and apply a minimum of 2 coats Midamax 190 to prepared surfaces using a brush, roller or spray at the stipulated spread rates. Allow to dry before over-coating.

SPREAD RATE: ± 8m²/litre/coat

NOTE: The spread rates quoted are approximate and should only be used as a guide as the actual rate will vary depending on the condition and porosity of the substrate.

OVERCOATING TIME: > 6 hours

CLEANERS/SOLVENTS: Water